Casting Time: 1 action
Range: 120 feet
Components: V, S
Spell List: Druid
You cause up to six pillars of stone to burst from places on the ground that you can see within range. Each pillar is a cylinder that has a diameter of 5 feet and a height of up to 30 feet.
The ground where a pillar appears must be wide enough for its diameter, and you can target the ground under a creature if that creature is Medium or smaller.
Each pillar has AC 5 a nd 30 hit points. When reduced to 0 hit points, a pillar crumbles into rubble, which creates an area of difficult terrain with a 10-foot radius that lasts until the rubble is cleared.
Each 5-foot-diameter portion of the area requires at least 1 minute to clear by hand.
If a pillar is created under a creature, that creature must succeed on a Dexterity saving throw or be lifted by the pillar.
A creature can choose to fail the save. If a pillar is prevented from reaching its full height because of a ceiling or other obstacle, a creature on the pillar takes 6d6 bludgeoning damage and is restrained, pinched between the pillar and the obstacle.
The restrained creature can use an action to make a Strength or Dexterity check (the creature’s choice) against the spell’s save DC. On a success, the creature is no longer restrained and must either move off the pillar or fall off it.
At Higher Levels: When you cast this spell using a s pell slot of 7th level or higher, you can create two additional pillars for each slot level above 6th.